The J-10B Fighter - now available in the U.K at SWM and ServoShop! Please note this is the kit version and other items are needed to complete this model.
The videos below show the J10 flying in various conditions. In one video you will get to see how the J10 handles the wind and in the other videos there's some great general club flying and J10 chases, Warning if you watch the videos you will want one!
- 'Kit set' Version
- The Wings Maker's electric jet series
- Hot aerobatics at high speed and scaled flying at low speed
- Lightweight and strong EPO foam provides structural strength and rigidity
|Wing Span:||28.7 in / 730 mm|
|Wing Area:||310 sq in / 20 sq dm|
|Flying Weight:||28.5 oz / 805 g|
|Fuselage Length:||42.7 in / 1085 mm|
|Requires:||Outrunner Motor 28/31 KM0283110 and Ducted Fan Propulsion Unit PL6800010, 4-channel "mixing radio" (elevator and aileron) w/ 3 micro servos SV2031, 40A (burst 50A) brushless ESC and 3 cells 11.1V 20C 2100mAh battery and charger|
ESC Specifications - Please Note
Although the manufacturer recommends a 30/35 Amp ESC for this aircraft, we have found that the World Models 70mm Fan unit can draw in excess of 37 Amps on a good battery. Following many flights with our own models we would recommend a 40 to 50 amp ESC on a 3 Cell Set Up and if using the 4 Cell Turbo Motor and TWM Fan we recommend a 60 to 70 amp ESC.
As with all final fix motor installations you should check the ESC used is adequate for your individual set up
From our own experience we did not find epoxy the best type of glue for EPO and we recommend Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.