Overview

This programming can be used to program all ZTW Mantis Series brushless ESCs quickly and easily except for the Mantis 6A ESC.

Note: ONLY compatible with ZTW Mantis-Series ESCs. Cannot be used to program ZTW Gecko Series or other ZTW ESCs.

Features

Programmable Options:

• Brake setting (off/soft/mid/hard -- default: off)
• Battery type: (Ni-XX/LiPo/LiFe -- default: LiPo auto detect)
• Low voltage cutoff setting (2.8V / 3.0V / 3.2V / None -- default: 3.0V)
• Factory default setup reset Timing settings (auto / 2° / 5° / 8° /15° / 22° /30° -- default: auto)
• SBEC output voltage (on 45A and larger models only) (5.0V / 5.5V / 6.0V -- default: 5.0V)
• Governor mode (RPM off / 1st soft start / 2nd soft start / gov mod 1 / gov mod 2 -- default: RPM off)
• Motor rotation (forward / reverse -- default: forward)
• Start-up strength (10% / 15% / 20% / 25% / 30% / 35% / 40% / 45% / 50% -- default: 30%)
• Low voltage cutoff type: (reduce power / cut-off power -- default: reduce)

Specifications

• Continuous Current: DC 5.0V～12.0V
• Width: 45mm
• Length: 70mm
• Height: 13mm
• Weight: 23g
• Upgrade Firmware online (Yes/No): no