ServoShop
Checkout |  Home


Futaba  |  Hitec  |  MacGregor  |  Tower Pro  |  PowerHD  |  New Power  |  Savox  |  Spektrum  |  Contact Us  |  Latest News  |  SecurityMetrics Credit Card Safe
Secured by PayPal



World Models Aircraft & The Wings Maker


Similar Products



The Wings Maker Panther Pre Assembled REF GE032P

The Wings Maker DF-032P Panther (combo - Pre Assembled) - Delta manufactured from tough EPO Foam

Nigel Hawes from RCM&E - Probably one of the best value EDF sport models on the market today

This is a superb model, that is easy to fly and launch. Being a delta it's easy to fly slowly, but equally at home when you open the taps.

A full power dive is great fun, as it goes like the proverbial bat out of hell when you want it to. You will need to switch to 'low rates' on such occasions, as it can be a little twitchy at really high speed.

Can be hand launched or use the included dolly (though you may want to put some bigger wheels on if flying off grass)

The manufacturer recommends using a 30 Amp ESC, however the motor/fan can draw in excess of 37 Amps with a good battery, so we recommend using a 40 to 50 Amp ESC.

  • The Wings Maker's electric jet series.
  • Hot aerobatics at high speed and relaxing flying at low speed.
  • Lightweight and strong EPO foam provides structural strength and rigidity.
  • Pre-Assembled Combo Version - Servos, motor and Fan unit pre-installed
  • Code No. : GE032P
  • Wing Span : 33 in / 850 mm
  • Wing Area : 299 sq in / 19.3 sq dm
  • Flying Weight : 24 oz / 680 g
  • Fuselage Length : 26.5 in / 675 mm

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

The manufacturer recommends using epoxy glue to put this kit together. However from our own experience we did not find epoxy the best type of glue for EPO and we recommend a cyano glue such as Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£109.99 Each

(inc.VAT)

picture


Customers Also Considered



The Wings Maker J10B Fighter Combo Set Ref GE034C

J-10B Fighter (Combo) - This is the Combo Version.

For a Ready Assembled Combo and for a J10 Kit Only (No Fan or Motor) see seperate listings.

The videos below show the J10 flying in various conditions. In one video you will get to see how the J10 handles the wind and in the other videos there's some great general club flying and J10 chases, Warning if you watch the videos you will want one!

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

  • 'Receiver ready combo set' Version
  • The Wings Maker's electric jet series
  • Hot aerobatics at high speed and scaled flying at low speed
  • Lightweight and strong EPO foam provides structural strength and rigidity
  • Code No. : GE034C
  • Wing Span : 28.7 in / 730 mm
  • Wing Area : 310 sq in / 20 sq dm
  • Flying Weight : 28.5 oz / 805 g
  • Fuselage Length : 42.7 in / 1085 mm
  • Requires : 4-channel "mixing radio" (elevator and aileron), 40A (burst 50A) brushless ESC and 3 cells 11.1V 20C 2100mAh battery and charger

ESC Specifications - Please Note

Although the manufacturer recommends a 30/35 Amp ESC (when running a 3-cell setup) for this aircraft, we have found that the fan unit will draw over 37 Amps with a good battery. Following many flights with our own models we would recommend a 40 to 50 amp ESC on a 3 Cell Set Up and if using the 4 Cell Turbo Motor and TWM Fan we recommend a 60 to 70 amp ESC.

As with all final fix motor installations you should check the ESC used is adequate for your individual set up

Although the manufacturer recommends using epoxy to put the kit together, from our own experience we did not find this type of glue to be particularly suitable for EPO and we recommend Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£99.99 Each

(inc.VAT)

picture



[ON SALE] The Wings Maker J10B Fighter Pre Assembled Ref GE034P

This is the Ready Assembled Combo Version - for the J10 Kit Only or Combo None Assembled see seperate listings.

The videos below show the J10 flying in various conditions. In one video you will get to see how the J10 handles the wind and in the other videos there's some great general club flying and J10 chases, Warning if you watch the videos you will want one!

Although the manufacturer recommends a 30/35 Amp ESC for this aircraft, we have found that with a good battery the fan will draw in excess of 37 Amps. Following many flights with our own models we would recommend a 40 to 50 amp ESC on a 3 Cell Set Up and if using the 4 Cell Turbo Motor and TWM Fan we recommend a 60 to 70 amp ESC.

As with all final fix motor installations you should check the ESC used is adequate for your individual set up

  • The Wings Maker's electric jet series.
  • Hot aerobatics at high speed and scaled flying at low speed.
  • Light weight and strong EPO foam provides structural strength and rigidity.
  • 'Pre-assembled Combo Set Version', comes with factory installed Brushless Outrunner Motor 28/30 (KM0283110), Ducted Fan Unit (PL6800010) and 3 Micro Servos (SV2031).
  • Code No. : GE034C
  • Wing Span : 28.7 in / 730 mm
  • Wing Area : 310 sq in / 20 sq dm
  • Flying Weight : 28.5 oz / 805 g
  • Fuselage Length : 42.7 in / 1085 mm
  • Requires : 4-channel "mixing radio" (elevator and aileron), 40A (burst 50A) brushless ESC and 3 cells 11.1V 20C 2100mAh battery and charger

From our own experience we did not find 5 minute epoxy the best type of glue for EPO and we recommend Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£109.99 Each

(inc.VAT)

picture
 
Privacy Policy Terms & conditions © Steve Webb Models Limited 2019. Postage & packing Contact us