Your shopping cart is currently empty.
New Models & Special Offers
Last 90 Days
Last 365 Days
Latest Sales Items
An easy to build, stable flying model kit, created as an introduction to the world of micro radio controlled aviation.
If you're looking for a way into a fantastically absorbing hobby, this is by far the best way to go.
The Scrappee has been designed from the ground up by Microaces to satisfy a number of goals:
However, the Scrappee is not exclusively for the beginner. Because of its wide speed envelope, light weight and clean lines it can climb fast, loop big and turn quickly. Indoors and out, even in a breeze, its a great performing aeroplane that can be enjoyed by seasoned modellers too.
Based on the staggered biplane wing layout of the Beechcraft Model 17, the Scrappee STAGG is an easy to build, stable flying model kit, with a performance suitable for light wind days or indoor flying in most sports halls.
With the lower wing position forward of the top wing, the model provides a very different flying experience than the standard Scrappee Trainer and Scrappee Biplane kits. It also looks amazing in the air.
This particular kit is decked out in a civilian aviation style with the 'Speedbird' stripes along the port and starboard sides of the fuselage. The vibrant red livery and large, bold registration numbers make identification and orientation in the air much easier.
The kit is available as Kit Only - which provides you with the complete airframe. You will need other items to complete this model. Essentially you will need a MXL_RX62HV2 Board – We have them available in FRSky , SFHSS Futaba and DSMX/DSM2 Protocols
Parkzone PKZ3351, PKZ3352 or PKZUA1151 Receiver Boards will fit, but other donor RC gear may be adapted.
Micro Aces Motor and Gear Box with Standard Shaft
The PKZ3624 Parkzone Motor is also suitable. Again, other Donor models might have suitable motor and gear boxes. Recycling your gear keeps costs down.
1-Cell Lipo. 130-180mAh 1S 25C with UM connector works well.
We suggest E-Flite EFLB1501S45 or similar
You will require UHU Por as the main adhesive and scalpel, 180 grit sandpaper or stick, straight edge ruler and tweezers are handy.
Scrappee kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.
Scrappee Classic Indoors Video
Model No.: MASCRPSTAGGSPE