Overview

A semi-scale EPO foam model of the ever popular high-wing light aircraft, suitable for intermediate to advanced pilots.

Not everyone wants a warbird and not everyone wants to fly fast and furious. Sometimes, circuits, bumps and lazy aerobatics are all you need to while away a few rewarding hours at the patch. If that sounds like your kind of flying and you happen to prefer your models to look the part then you’ll already have been inspired by the look of the Sky Trainer. Spanning 1020mm and supplied in PNP form (just add Tx, Rx and battery) this docile lookalike comes with a pre-fitted 3128–1550KV motor, 20A ESC, 6 high quality pre-installed servos and a very carefully considered airframe design. From its flap-equipped one-piece semi-symmetrical wing section with droop tips (for increased low speed efficiency) to its nicely hidden underslung battery and receiver bay, plug-in main undercarriage, steerable nose leg and profiled struts, this is a model that’ll definitely turn heads. Pick a good day, fly it scale and you’ll be in seventh heaven.

Features

• 3128 1550KV brushless motor and 20A ESC
• Suits 2S 7.4V 1300mAh 25C LiPo
• Underslung battery compartment with secure hatch cover
• Six pre-installed high quality servos
• Flap-equipped
• Highly durable EPO airframe
• Quick and easy assembly
• Superb detailing
• Takes standard 5-channel radio
• One piece wing with droop tips

What's in the Box

• 1x Factory assembled fuselage with decals applied
• 1x Factory assembled 1-piece wing with servos installed
• 1x Factory assembled and painted tail set with decals applied
• 1x Pre-installed 3128 1550KV motor
• 1x Pre-installed 20A ESC with JST connector
• 1x Fixed tricycle undercarriage set
• 1x Efficient 8 x 4.5" 2-blade propeller
• 6x Pre-installed high quality servos
• 1x Instruction manual

Specifications

• Wingspan: 1,020mm, 40.1in
• Overall length: 805mm(31.7in)
• Flying weight: ~ 700g
• Motor size: 3128-KV1550
• Wing load: 47.3g/dm² (0.11oz/in²)
• Wing area: 14.8dm² (230sq.in)
• ESC: 20A
• Servo: 9g Servo x 6
• Recommended battery: 7.4V 1300mAh 20C

Needed to Complete

• 5-channel transmitter and receiver combo
• 2S 1300mAh LiPo
• 2S compatible LiPo balance charger